Programming Control
8.
OPL Mode Enable/Disable
"oPL"
This option allows the owner to enable
or
disable the
OPL Mode
in which no vend price needs to
be
satisfied to operate the machine.
How
to
Program the OPL Mode Enablel
Disable
1.
Control must
be
in
Manual Mode. Refer to
Entering the Manual Mode.
2. Press the LOW TEMP
(1\)
or the
DELICJITES
(v)
keypad until
"Prog"
appears in
the display. Press the START (enter) keypad and
"AtSH" will appear in the display.
3. Press the LOW TEMP
(1\)
or
the
DELICATES
(v)
keypad to scroll through the
programmable options until
"oPL" appears
in
the
display.
4. When
"oPL" appears
in
the display, press the
START (enter) keypad.
The
current OPL Mode
EnablelDisable status will appear
in
the display.
"on"
= Option Enabled
"oFF"
= Option Disabled
NOTE:
The
default value is oFF.
5.
Press the LOW TEMP
(1\)
ortheDELICJITES
(v)
keypad to change the current status.
6.
Press the START (enter) keypad when the
desired status appears
in the display. The new
value is saved and the next option,
"Aud"
or
"AUd" (depending
on
control software version),
will appear
in the display.
NOTE:
To
program
"Aud"
or
"AUd"
(depending
on control software version) (Audio Signal), refer
to
option
9.
To
program other options, refer to the
appropriate section.
How
to
Exit Programming Feature
Press the MED TEMP
«)
keypad until the control
returns to Ready Mode.
30
©
Published
by
pennission
of
the
copyright owner -
DO
NOT
COpy
or TRANSMIT 513001
To Next Page
Loading...
