Communications Mode
Infra-red Communications
The Infra-red Communications feature allows the
control to communicate with
an
external device.
The
control can
be
programmed and have its data read
without using the keypad.
It
may also
be
used to start
and stop various diagnostic tests.
How to Begin Communications with An
External Device
The control will go blank and the display will show
"-C-"
until the communication is complete. The
display will return to the previous mode.
If
an error
occurs that terminates communication, the display will
show
"Elxx" ("xx" represents the error code).
NOTE: The Infra-red Communications option
must be turned on. Refer
to option 29
in
Programming Control.
Card Reader Communications
(Card Models Only)
The Card Reader Communications feature allows the
control to communicate with the card reader. The
control can
be
programmed and have its data read
without using the keypad.
Network Communications
The Network Communications feature allows the
control to communicate with a network.
The
control
can
be
programmed and have its data read without
using the keypad.
513001
78
@ Published by pennission
of
the copyright owner - DO NOT
COpy
or
TRANSMIT
To Next Page
Loading...
