Clear Vend Feature
The Clear Vend feature allows the owner to clear a
control which
is in the middle
of
satisfYing the initial
vend price, and set it back to the ready mode.
NOTE:
The
Clear
Vend
Feature
does
not
work
with
Additional Vend
Mode
or
Additional
Cycle
Top-Off.
How
to
Clear Vend
1.
Open the service door. Refer to Opening
the
Service Door. The coin vault must remain closed.
2. While pressing and holding the MED TEMP
keypad with one hand, press the
LOW TEMP
keypad with the other hand. The control will
reset to the ready mode.
513001
76 © Published by permission
of
the copyright
owner
- DO
NOT
COPY
or
TRANSMIT
To Next Page
Loading...
