Programming Control
4.
Start Pulse Value "PLSE"
This option allows the owner to program the value
of
the Start Pulse ifused for multiple pulses with an after-
market central card reader
or
pay system. Refer to
option 5 for additional information.
How
to
Program Start Pulse Value
1.
Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2.
Press the LOW TEMP
(1\)
or the
DELICATES (v) keypad until
"Prog" appears in
the display. Press the
START
(enter) keypad and
"AtSH" will appear in the display.
3.
Press the LOW TEMP
(1\)
or the
DELICATES
(v)
keypad
to
scroll through the
programmable options until
"PLSE" appears in
the display.
4. When
"PLSE" appears in the display, press the
START
(enter) keypad. There are five digits in
the Start Pulse Value. The fifth digit will appear
in the display and will flash one second on and
one second
oft'.
Refer to Figure
6.
NOTE:
If
the
Start
Pulse Value is $100.00
or
more,
the fifth digit is
"1-6".
If
the
Start
Pulse Value is
$99.99
or
less, the fifth digit is
"0".
CHM507R
Figure 6
5.
Press the LOW TEMP
(1\)
or
the
DELICATES
(v)
keypad
to
increase or decrease
the value
of
the fifth digit.
NOTE:
The
Start
Pulse Value
can
be
set from 1
to
65,535. The default value is 25.
6.
Press the
START
(enter) keypad to enter the fifth
digit and display remaining four digits. The
active digit will flash one second on and one
secondoft'.
NOTE: To go
back
to the
current
programmable
option without changing the value press the MED
TEMP
«)
keypad.
7.
Press the LOW TEMP
(1\)
or the
DELICATES
(v)
keypad to increase or decrease
the value
of
the active digit and the
START
(enter) keypad to enter the value
of
the digit and
advance to the next digit.
8.
Press the
START
(enter) keypad with the last
active digit. The new value
is
saved and the next
option,
"PLSn", will appear in the display.
NOTE:
To
program
"PLSn" (Start Pulse Mode),
refer to
option 5.
To
program
other
options, refer to
the appropriate section.
How
to
Exit Programming Feature
Press the MED TEMP «) keypad until the control
returns
to
Ready Mode.
26
© Published by pennission
of
the copyright owner - DO NOT
COPY
or
TRANSMIT
513001
To Next Page
Loading...
