EasyManua.ls Logo

Alliance Laundry Systems FLW1526C - Error Codes

Alliance Laundry Systems FLW1526C
255 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Error Codes
Following is a list
of
possible error codes for an
beginning with
"EC"
refer to card reader errors. All
electronic control. Errors beginning with
"EI" refer to
other errors refer to machine errors.
external device Infra-red communication errors. Errors
Display
Description
Causel
Corrective Action
EI01
Transmission Failure
Communication failure. Re-aim external device and
try
again.
EI02
Device Time-out
Communication failure. Re-aim external device and
try
again.
EI03
Invalid Command Code
Incorrect machine type. Before downloading, ensure data
is for current machine
type.
EI04
Command Packet Time Out
Communication failure. Re-aim external device and
try
again.
EI05
Invalid or Out-of-Range Data
Incorrect machine type. Before downloading, ensure data
is for current machine type and values entered are within
the minimum and maximum limits.
EI09
CRC-16 Error
Communication failure. Re-aim external device and
try
again.
EIOA
Framing Error
Communication error. Re-aim external device and
try
again.
EIOC
out Exceeded
Communication error. Re-aim external device and
try
again.
EIOE
Encryption Error
Incorrect machine type. Before downloading, ensure data
is for current machine type.
EIOF
Invalid Wake-up or Infra-red Disabled Communication failure or infra-red is disabled. Manually
enable infra-red
on
control or re-aim external device and
try again.
EC02
Time-out Error
Communication failure. Try card again.
EC03
Invalid Command Code
Incorrect machine
type. Before downloading, ensure data
is for current machine type.
EC05
Invalid
or
Out-of-Range Data
Incorrect machine type. Before downloading, ensure data
is for current machine type
and
values entered are within
the minimum and maximum limits.
EC11
!"v
'-'LU.
...
Reader Initialization
Communication is valid,
but
there is no card reader
initialization. Power down, power up and
try again.
EC18
No
Communication
Card reader initialized, communication lost. Power down,
power up and
try again.
If
error persists, replace control or
card reader.
Table 18 (Continued)
513001
© Published by permission
of
the copyright owner - DO NOT COPY
or
TRANSMIT
73

Table of Contents

Related product manuals