Programming Control
22.
Special Vend D Days Enable
"SPd-"
This option allows the owner to enable
or
disable a
fourth special vend.
Special Vend D can
be
programmed using an external
device
or
network.
The owner
may
also
tum
the Special Vend D option
on
or
off
if
desired.
How
to
Program Special Vend D Days
Enable
1.
Control must
be
in
Manual Mode. Refer to
Entering the Manual Mode.
2. Press the LOW TEMP
(1\)
or
the
DELI CATES
(v)
keypad until
"Prog"
appears
in
the display. Press the START (enter) keypad and
"AtSH" will appear in the display.
3. Press the LOW TEMP
(1\)
or
the
DELICATES
(v)
keypad to scroll through the
programmable options until
"SPd-"
appears in
the display.
4. When
"SPd-"
appears in the display, press the
START (enter) keypad. The control displays
"on" or "oFF" for this parameter.
NOTE: The default value is oFF.
5. Press the LOW TEMP
(1\)
or the
DELICATES
(v)
keypad to select "on" or
"oFF".
6. Press the START (enter) keypad when the
desired status appears in the display. The new
value is saved and the next option,
"droP",
will
appear in the display.
NOTE:
To
program
"droP"
(Drop
Off
Mode),
refer to
option 13.
To
program other options, refer
to the appropriate section.
How
to
Exit Programming Feature
Press the MED TEMP
«)
keypad until the control
returns to Ready Mode.
513001
© Published by pennission
of
the copyright owner -
DO
NOT
COpy
or
TRANSMIT
57
To Next Page
Loading...
