Alliance Laundry Systems FLW1526C - Step 3: Add Laundry Supplies; Step 4: Set Fabric Selector; Step 5: Set Wash Temperature

Operation
Step 3: Add Laundry Supplies
Open dispenser drawer. Measure and add low sudsing,
high efficiency (HE) detergent
(l), bleach (2) and
fabric softener (3) to the dispenser drawer (refer to
Figure 15). Close dispenser drawer.
IMPORTANT:
If using non-HE detergent, avoid
oversudsing
by using 1/2 of the detergent
manufacturer's recommended amount.
FLW2130N
1 Detergent
2 Bleach
3 Fabric Softener
Figure 15
Step 4: Set Fabric Selector
Push touchpad for NORMAL, PERM PRESS or
DELICATESIBULKY cycle. Light indicates
selection.
NOTE: Changes can be made to Fabric Selector
setting
np until the first fill is complete.
FLW2228N
Figure 16
Step 5: Set Wash Temperature
Push touchpad for HOT, WARM or COLD. Light
indicates selection.
NOTE: Always follow
manufacturer's care labels.
FLW2229N
Figure 17
AI
CAUTION
Dispenser drawer requires a special tool
for removal. Contact a service person if
removal is necessary.
W236
803363
@ Copyright. Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT
15