Programming Control
How
to
Program Special Vend A End
How
to
Program Special Vend A End Date
Month "SA08"
This option allows the owner to set the month that
Special Vend A will end.
1.
Press the LOW TEMP (A) or the
DELICATES
(v)
keypad to scroll through the
programmable Special Vend A options until
"SA08" appears in the display.
2. When
"SA08" appears in the display, press the
START (enter) keypad.
The
current end month
will appear in the display.
3.
Press the LOW TEMP
(A)
or the
DELI CATES
(v)
keypad to increase
or
decrease
the end month to the desired month.
If
"0"
is selected and Special Vend A is on,
Special Vend A will occur at the time and day
of
week selected, regardless
of
the month.
NOTE: The value can be set
at
0 (off)
or
from 1-12.
The
default value is
O.
4. Press the START (enter) keypad when the correct
month appears in the display.
The
new
value
is
saved
and the next Special Vend A option,
"SA09", will appear in the display.
NOTE:
To
program "SA09" (Special Vend A
End
Date), continue to next Special Vend A option.
To
program
other options, press the MED
TEMP
«)
keypad and refer
to
the
appropriate section.
How
to
Exit Programming Feature
Press the MED TEMP
«)
keypad until the control
returns to Ready Mode.
"SA09"
This option allows the owner to set the date that
Special Vend A will end.
1.
Press the LOW TEMP (A) or the
DELICATES
(v)
keypad to scroll through the
programmable Special Vend A options until
"SA09" appears in the display.
2. When
"SA09" appears in the display, press the
START (enter) keypad. The current end date will
appear in the display.
3. Press the LOW TEMP
(A)
or
the
DELICATES
(v)
keypad to increase or decrease
the end date to the desired date.
If
"0"
is selected and Special Vend A is on,
Special Vend A will occur at the time and days
of
week selected, regardless
of
the date.
NOTE:
The
value can be set
at
0 (off)
or
from 1-31.
The default value
is
O.
4. Press the START (enter) keypad when the correct
date appears in the display.
The
new
value
is
saved
and the next Special Vend A option,
"SA
10",
will appear in the display.
NOTE:
To
program
"SA10" (Special Vend A
End
Year), continue to next Special Vend A option.
To
program
other
options, press the MED
TEMP
«)
keypad and refer to the appropriate section.
How
to
Exit Programming Feature
Press the MED TEMP «) keypad until the control
returns to Ready Mode.
50
© Published
by
pennission
of
the copyright owner - DO NOT COPY or TRANSMIT
513001
To Next Page
Loading...
