How
to
Read Table 13
Use this table to set the amount
of
time for Power Fail
Reset.
"oFF"
turns the option OFF. The current cycle status
will be saved. When power is restored, the cycle will
begin where it was interrupted.
Programming Control
If
133 is entered, the current cycle will be saved for
up
to five minutes.
Ifpower
is not restored within five
minutes, the control will erase the cycle status. The
minimum power failure time is five minutes. The
maximum power fail reset time is 127 minutes.
NOTE:
The
default value is oFF.
"PFr"
DISPLAY TO ENTER IN
STEP
6
POWER FAIL RESET TIME
"oFP'
Turned
OFF.
Cycle will
be
saved.
133
5 minutes without power before cycle
is
lost
...
add
one
minute
for
every number
up
to
255
127
minutes without power before cycle
is
lost
Table 13
513001
©
Published
by permission
of
the copyright owner -
DO
NOT
COPY
or TRANSMIT
61
To Next Page
Loading...
