Troubleshooting
Washer
Symptom
Possible
Cause/Solution
Vibrates/Moves
Slightly
·
Make sure washer is level. Uneven leveling can cause vibration.
·
Make sure washer is installed on a solid, sturdy and level floor. The washer should not
be
installed on carpeting, soft tile, a platform or other weakly supported structures.
·
Make sure rubber feet are installed on all four leveling legs. Refer to Installation section,
step
5.
Is
Noisy
·
Make sure washer is level. Uneven leveling can cause vibration.
·
Some sounds may
be
a part
of
normal operation for a frontload washer.
Load
is
too Wet
·
Wash load may
be
unbalanced. The washer may have limited the spin speed to prevent
damage to the machine. Redistribute the load.
·
Load is too small. Add items to make full load.
Wrong Water
Temperature
·
Make sure that the controls are properly set.
·
Check fill hoses. Make sure hot faucet hose is connected to hot mixing valve (indicated
with "H" on the valve bracket) and cold faucet is connected to cold mixing valve
(indicated with
"C"
on
the valve bracket).
·
Make sure laundry room water heater is adjusted properly.
803363 © Copyright, Alliance Laundry Systems LLC - DO NOT COPY
or
TRANSMIT
21
To Next Page
Loading...
