Programming Control
22. Special Vend A Data "SPA-"
This option allows the owner to set the day
or
days
of
a special vend.
Special Vend A is used to change the standard vend
prices for special occasions. The special vend can be
programmed to start and end on a specific day or days
of
the week.
The owner may also
tum
the Special Vend A option on
or
off
if
desired.
The factory default setting for all Special Vend A
programming options is zero (0).
How to Program Special Vend A Days
Enable "SA01"
1.
Control must
be
in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATESIBULKY
(1\)
or the
COLD
(v)
keypad until
"Prog"
appears in the
display. Press the START (enter) keypad and
"AtS
1"
will appear in the display.
3. Press the DELICATESIBULKY
(1\)
or the
COLD
(v)
keypad to scroll through the
programmable options until
"SPA-" appears
in
the display. Press the START (enter) keypad and
"SA01" will appear in the display.
4. When
"SAO
1 " appears in the display, press the
START (enter) keypad. A number will appear in
the display that corresponds to the current
Special Vend A Days Enable Programming
Value.
S.
Locate the desired number in the first column
of
Table
lOon
the following pages.
6.
Press the DELICATESIBULKY
(1\)
or the
COLD
(v)
keypad to increase or decrease the
current number until correct.
7. Press the START (enter) keypad when the correct
number appears in the display. The next Special
Vend A option,
"SA02", will appear in the
display.
NOTE:
To
program
"SA02"
(Special Vend A
Start
Hour),
continue
to
the
next
Special Vend A option.
To
program
other
options, press
the
WARM
«)
keypad
and
refer
to
the
appropriate
section.
How to Exit Programming Feature
Press the
WARM
«)
keypad until the control returns
to Ready Mode.
802952
© Published
by
permission
of
the copyright owner - DO NOT COPY
or
TRANSMIT
49
To Next Page
Loading...
