How
to
Program Special Vend A Vend
Price
#5
"SA15"
This option allows the owner to set the vend price for a
penn
press/wann wash in Special Vend A.
The
corresponding LEDs will
be
lit while programming.
1.
Press the DELICATESIBULKY (A) or the
COLD
(v)
keypad
to
scroll through the
programmable Special Vend A options until
"SA
15"
appears in the display.
2. When
"SA
15"
appears in the display, press the
START (enter) keypad. There are five digits in
the Special Vend A Vend Price #S.
The
fifth digit
will appear in the display and will flash
one
second on and one second off. Refer to Figure
19.
NOTE:
If
the
vend
price
is $100.00
or
more,
the
fifth digit is
"1-6".
If
the
vend
price
is $99.99
or
less,
the
fifth
digit
is
"0".
[
CHM507R
Figure
19
3. Press the DELICATESIBULKY (A)
or
the
COLD
(v)
keypad to increase
or
decrease the
value
of
the fifth digit.
NOTE:
The
vend
price
can
be
set
from
0 to 65,535.
4. Press the START (enter) keypad to enter the fifth
digit and display remaining four digits.
The
active digit will flash
one
second on and one
second off.
Programming Control
NOTE:
To go
back
to
the
current
programmable
Special Vend A option
without
changing
the
value,
press
the
WARM
«)
keypad.
S.
Press the DELICATESIBULKY (A)
or
the
COLD
(v)
keypad to increase or decrease the
value
of
the active digit and the START keypad
to
enter the value
of
the digit and advance to the
next digit.
6. Press the START (enter) keypad with the last
active digit. The next Special Vend A option,
"SA
16",
will appear in the display.
NOTE:
To
program
"SA16"
(Special Vend A Vend
Price
#6),
continue
to
next
Special Vend A option.
To
program
other
options,
press
the
WARM
«)
keypad
and
refer
to
the
appropriate
section.
How
to
Exit Programming Feature
Press the
WARM
«) keypad until the control returns
to Ready Mode.
802952
© Published by permission
of
the
copyright owner - DO NOT
COPY
or
TRANSMIT
63
To Next Page
Loading...
