Chapter 5: Installing the Switch in an Equipment Rack
106
Overview of Installing the GS980MX/10HSm Switch in an Equipment
Rack
You can install the GS980MX/10HSm switch in a 19-inch equipment rack
two ways. One way is with the RKMT-J14 brackets that come with the
switch. Refer to Figure 47.
Figure 47. RKMT-J14 Brackets and Switch
For installation instructions, refer to “Installing the GS980MX/10HSm
Switch in an Equipment Rack with the RKMT-J14 Brackets” on page 108.
You can also install the switch in an equipment rack with the optional
RKMT-J15 bracket. Refer to Figure 48.
Figure 48. RKMT-J15 Bracket
To Next Page
Loading...
Need help?
General
