199
Chapter 9
Configuring the Member(s) of the Stack
Trunk with 5Gbps Multi-Speed Ports
This chapter applies to the GS980MX/10HSm, GS980MX/18HSm,
GS980MX/28PSm, and GS980MX/52PSm switches only, since the
GS980MX/28 and GS980MX/52 switches do not have 5Gbps ports. It
contains the following sections:
“Introduction” on page 200
“Configuring the Member Switch” on page 201
“Configuring GS980MX/10HSm” on page 203
“Configuring GS980MX/18HSm” on page 209
“Configuring GS980MX/28PSm” on page 215
“Configuring GS980MX/52PSm” on page 221
“What to Do Next” on page 227