GS980MX Series Installation Guide for Virtual Chassis Stacking
107
Caution
Stability Hazard - The rack may tip over causing serious personal
injury. Before extending the rack to the installation position, read the
installation instructions. Do not put any load on the slide-rail
mounted equipment in the installation position. Do not leave the
slide-rail mounted equipment in the installation position. E134
The bracket lets you install two GS980MX/10HSm switches side-by-side.
Refer to Figure 49.
Figure 49. RKMT-J15 Bracket with Switches
Note
The RKMT-J15 Bracket is purchased separately.
For installation instructions, refer to “Installing the GS980MX/10HSm
Switch in an Equipment Rack with the RKMT-J15 Bracket” on page 113.
To Next Page
Loading...
