Allied Telesis AlliedWare Plus GS980MX Series User Manual

GS980MX Series Installation Guide for Virtual Chassis Stacking
115
Figure 59. Sliding Out the Bracket of the RKMT-J15
4. Place the switch on one side of the bracket. Align the front panel with
the front edge of the bracket. If you are installing only one switch, you
may install it on either the left or right side. Refer to Figure 60.
Figure 60. Placing the GS980MX/10HSm Switch in the RKMT-J15 Bracket

Allied Telesis AlliedWare Plus GS980MX Series Specifications

General

Brand	Allied Telesis
Model	AlliedWare Plus GS980MX Series
Category	Switch
Language	English