Cleaning, maintenance and repairs
164
Condor 12001-C/15001-C BAH0030-4 07.15
Every day before
starting work
Visual inspection of the dual-circuit pneumatic
braking system
Section
12.5.8.1
Draining the compressed air tank
Section
12.5.8.3
Visual inspection of the lower link pins Section 12.4.2
Before refilling the
hopper or once
every hour
Checking the seed placement depth Section 10.3.1
Check the seed tubes for debris and clean if
necessary
During operation
Check fertiliser distributor head(s) for impurities
and clean if necessary
(see section "Clean the distributor head")
Section 12.2.1
Check metering unit for impurities
and clean if necessary (see section "Emptying
the hopper and/or metering unit.")
Section 10.6
Daily at the end of
work
Cleaning the implement (as required) Section 12.2
Every week, at least
every 50 operating
hours
Specialist
workshop
Check and service the
hydraulic hose lines.
The inspection has to be recorded by the
owner/operator.
Section 12.5.3
Before the season,
then every two weeks
Checking the inflation pressure of the running
gear tyres
Section 12.4.4
Check the tyre inflation pressure on the support
wheels
Section 12.4.5
Check the tyre inflation pressure on the press
rollers
Section 12.4.6
Checking the oil level in the Vario gearbox Section 12.4.1
Every 200 operational
hours
Specialist
workshop
Lubricating the axles Section 12.5.5