Amazone Precea 3000 User Manual

6.4.12.3 Adjusting the mechanically driven grain singling unit
6.4.12.3.1 Determining the gear ratio with leading wheel drive
REQUIREMENTS
The singling disc is selected
The gear wheel in the leading wheel drive is
selected
1. To calculate the desired grain spacing from the
spread rate,
refer to the AmaScan2 operating manual,
"Entering the target rate",
or
refer to the AmaCheck operating manual,
"Determining the grain spacing".
2. Depending on the gear wheel
1
in the leading
wheel drive and the desired grain spacing,
determine the gear ratio for the leading wheel
drive from the table.
CMS-I-00002868
CMS-T-00003646-D.1
CMS-T-00003651-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
105

Amazone Precea 3000 Specifications

General

Brand	Amazone
Model	Precea 3000
Category	Farm Equipment
Language	English