9.2 Lubricating the machine
IMPORTANT
Implement damage due to improper
lubrication
Grease the implement at the marked
lubrication points according to the
lubrication schedule.
To ensure that dirt is not pressed into
the lubrication points,
thoroughly clean the grease nipples and
the grease gun.
Only grease the implement with the
lubricants listed in the technical data.
Press the dirty grease completely out of
the bearings.
CMS-T-00002349-C.1
9 | Repairing the machine
Lubricating the machine
MG6660-EN-II | D.1 | 27.09.2021
216
To Next Page
Loading...
Need help?
General
