6.3.8 Coupling the 3-point mounting frame
IMPORTANT
Collision between frame ballasting and
tractor tyres
To ensure that the frame ballasting î§îîî
between the tractor tyres,
determine the width of the frame
ballasting and compare it to the inner
track width of the tractor.
1. Set the tractor lower links
to the same height.
2. Couple the lower links
from the tractor seat.
3. Couple the top link
.
4. Check whether the top link catch hooks
and
lower link catch hooks
are correctly locked.
CMS-I-00001225
6.3.9 Raising the jacks
1. To relieve the jacks,
raise the implement.
2. Pull out the spring cotter pin
.
3. Hold the jack firmly.
4. Remove the pin
.
CMS-I-00002003
CMS-T-00007518-A.1
CMS-T-00001838-A.1
6 | Preparing the machine
Coupling the implement
MG6660-EN-II | D.1 | 27.09.2021
64