30. Install the shot channel with the spring cotter pin
.
31. Establish the ISOBUS connection to the tractor.
32. Restart the implement.
CMS-I-00003814
9.1.30 Cleaning the distributor head
INTERVAL
at the end of the season
1. Use a suitable aid to safely reach the distributor
head.
2. Loosen the knurled screws
.
3. Remove the cover
.
CMS-I-00003957
4. Clean all of the outlets
.
5. Install the cover.
6. Tighten the knurled screws.
CMS-I-00003958
CMS-T-00005594-B.1
9 | Repairing the machine
Maintaining the machine
MG6660-EN-II | D.1 | 27.09.2021
213
To Next Page
Loading...
