Amazone Precea 3000 - Checking the Tightening Torque for the Radar Sensor Bolts; Checking the Frame Connection Tightening Torque

9.1.11 Checking the tightening torque for the radar sensor bolts
INTERVAL
After initial operation
Every 12 months
NOTE
When the tightening torque is too high, the spring-
suspended sensor mount is warped and the radar
sensor does not work properly.
Check the tightening torque on the radar sensor.
CMS-I-00002600
9.1.12 Checking the frame connection tightening torque
INTERVAL
After initial operation
Every 12 months
Check the tightening torque on both sides.
120 Nm
CMS-I-00002037
CMS-T-00002383-D.1
CMS-T-00002384-B.1
9 | Repairing the machine
Maintaining the machine
MG6660-EN-II | D.1 | 27.09.2021
192