9.1.26 Cleaning the micropellet metering unit
INTERVAL
Every 10 operating hours
or
daily
1. Move the switchover flap
to position
.
CMS-I-00002580
2. Close the the sliding shutter
on the
micropellet hopper.
3. Relieve the bottom flap lever
.
CMS-I-00002576
4. Insert the unlocking tool
into the metering unit
cover
.
5. Unlock the metering unit cover on the metering
housing
.
6. Open the metering unit cover.
CMS-I-00002582
CMS-T-00003601-B.1
9 | Repairing the machine
Maintaining the machine
MG6660-EN-II | D.1 | 27.09.2021
204