Amazone Precea 3000 - Adjusting the Grain Singling Unit

6.4.10.3 Checking the seed placement depth
1. Seed approx. 30 m at working speed.
2. Expose the grains at several points using the
multi-placement tester.
3. Use the read-off edge of the multi-placement
tester to remove the earth in layers.
4. Place the multi-placement tester horizontally on
the ground.
5. Set the pointer
1
on the seed grain.
6. Read the seed placement depth on the scale
2
.
7. If the desired seed placement depth cannot be
set, increase the coulter pressure.
See section "Adjusting the coulter pressure".
2
1
CMS-I-00002010
6.4.11 Adjusting the grain singling unit
6.4.11.1 Changing the singling disc
1. Secure the tractor and implement.
2. Open the locks
1
.
3. Remove the cover
2
.
1
2
CMS-I-00001909
CMS-T-00002411-D.1
CMS-T-00005516-B.1
CMS-T-00005572-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
92