Amazone Precea 3000 User Manual

2. To monitor the fan pressure,
refer to the ISOBUS operating manual.
or
Read the fan pressure on the pressure gauge.
NOTE
If the desired fan pressure is not reached, a
bigger hydraulic motor can help.
For more information, contact your specialist
workshop.
6.4.7 Preparing the track marker for operation
6.4.7.1 Calculating the track marker length
6.4.7.1.1 Marking at the centre of the tractor
The hydraulically actuated track markers produce
alternating marks. This mark serves as an reference
to the tractor driver for driving the next bout after
turning at the headland. The length and pitch of the
track markers are adjustable.
The track marker length L
TM
describes the distance
from the centre of the implement to the contact area
of the track marker disc at the centre of the tractor.
NOTE
640 cm working width can only be marked in
the tractor track. See section "Adjusting the track
marker for 6.00 m working width".
R
LTM
CMS-I-00001215
CMS-T-00005433-B.1
CMS-T-00001938-C.1
CMS-T-00001939-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
80

Amazone Precea 3000 Specifications

General

Brand	Amazone
Model	Precea 3000
Category	Farm Equipment
Language	English