6. Secure the jack with a pin
.
7. Secure the pin with a spring cotter pin
.
8. Repeat the procedure for the second jack.
CMS-I-00002003
8.10
Disconnecting the supply lines from the hose package
1. To disconnect the conveyor hose
from the
hose package
,
remove the bracket
on the connecting piece.
2. Depending on the implement equipment,
disconnect the second conveyor hose from the
hose package.
3. Depending on the implement equipment,
disconnect the front hopper supply
from the
hose package.
4. Depending on the implement equipment,
disconnect the metering unit shutoff
from the
hose package.
CMS-I-00003124
8.11
Uncoupling the ISOBUS line
1. Unplug the connector
of the ISOBUS line.
CMS-I-00004333
CMS-T-00004440-A.1
CMS-T-00006174-B.1
8 | Parking the machine
Disconnecting the supply lines from the hose package
MG6660-EN-II | D.1 | 27.09.2021
179