17. Install the cover
.
18. Install the bolts and washers
.
CMS-I-00002645
6.4.12.3.5 Deactivating the mechanically driven grain singling unit
1. To deactivate the mechanically driven grain
singling unit,
remove the shear pin
.
The grain singling unit is separated from the drive
shaft
.
2. Park the shear pin on the grain singling unit
.
CMS-I-00002696
6.4.13 Adjusting the PreTeC coulter
6.4.13.1 Adjusting the star clearers
The star clearers allow the seeding unit to run
smoothly on soils with coarse surface structures. The
star clearers should only move plant residues to the
side. If the soil is moved completely, the press roller
does not have enough fine soil to close the seed
furrow.
NOTE
The adjustment of the star clearers must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
CMS-T-00003865-A.1
CMS-T-00005523-B.1
CMS-T-00001933-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
114