Amazone Precea 3000 - Safe Maintenance and Modification

2.1.5 Safe maintenance and modification
2.1.5.1 Changes on the implement
Only authorised design changes
Design changes and extensions can impede the
functioning and operational safety of the machine.
This can result in serious injury or death.
Have any design changes and extensions
performed only by a qualified specialist
workshop.
To ensure that the operating permit
remains valid in accordance with national
and international regulations,
ensure that the specialist workshop only uses
conversion parts, spare parts and special
equipment approved by AMAZONE.
CMS-T-00002305-D.1
CMS-T-00002322-B.1
2 | Safety and responsibility
Basic safety instructions
MG6660-EN-II | D.1 | 27.09.2021
15