Amazone Precea 3000 - Parking the Pretec Coulter

Depending on the implement equipment, the topmost
position can differ.
1. Remove the linch pin
1
from the locking pin
3
.
2. Hold the wheel mark eradicator by the recessed
grip
2
.
3. Remove the locking pin
3
.
4. Move the wheel mark eradicator into the topmost
position.
5. Secure the wheel mark eradicator with the locking
pin.
6. Secure the locking pin with the linch pin.
1
2
3
CMS-I-00000942
8.8
Parking the PreTeC coulter
In the
P
position, the lowered depth control wheels
protect the furrow formers
1
and catch roller
2
.
CMS-I-00001999
CMS-T-00001920-D.1
8 | Parking the machine
Parking the PreTeC coulter
MG6660-EN-II | D.1 | 27.09.2021
177