Amazone Precea 3000 User Manual

NOTE
The ideal working range is between 130 and 160
bar.
Always rest the frame ballasting on the lower link.
1. Lower the implement onto the ground.
2. To move the frame ballasting to the desired
position,
actuate the "green 1" tractor control unit.
or
actuate the "blue 1" tractor control unit.
3. To relieve the frame ballasting,
actuate the "green 2" tractor control unit and set a
pressure of 30 bar.
or
actuate the "blue 2" tractor control unit and set a
pressure of 30 bar.
The frame ballasting is resting on the lower links.
CMS-I-00004101
6.4.19 Adjusting the placement depth on the coupled fertiliser coulter
1. Raise the implement.
2. Secure the tractor and implement.
3. Remove the linch pin
3
.
4. Remove the pin
2
.
The notches
4
between 1 and 5 serve as
orientation.
5. To adjust the fertiliser placement depth,
turn the setting shaft
1
to the desired position.
6. Install the pin.
7. Install the linch pin.
8. Make the same adjustment for all fertiliser
coulters.
CMS-I-00003935
CMS-T-00005574-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
141

Amazone Precea 3000 Specifications

General

Brand	Amazone
Model	Precea 3000
Category	Farm Equipment
Language	English