4.15.2 Low level sensors
4.15.2.1 Seed
The low level sensor
triggers an alarm as soon as
the low level sensor is no longer covered with seed.
CMS-I-00001986
4.15.2.2 Fertiliser
The low level sensor
triggers an alarm as soon
as the low level sensor is no longer covered with
fertiliser. The low level sensor can be installed at
different positions
. As a result, the triggering point
can be adapted to the spread rate.
CMS-I-00001987
4.15.3 Electronic remote scraper bar adjustment
With the electronic remote scraper bar adjustment
, the scrapers are conveniently adjusted on the
control terminal.
In conjunction with SmartControl, the scrapers are
controlled automatically. By means of the opto-sensor
monitoring, gaps or doubles are detected and the
scraper bar position is adjusted. This automatically
reduces gaps and doubles.
CMS-I-00001917
CMS-T-00001979-B.1
CMS-T-00001981-B.1
CMS-T-00001983-A.1
CMS-T-00001984-B.1
4 | Product description
Electronic monitoring
MG6660-EN-II | D.1 | 27.09.2021
45