Amazone Precea 3000 - Turning on the Headlands; Checking the Placement Depth; Using the Shifted Tramline

7.2 Turning on the headlands
1. To ensure  of the singling discs,
maintain an overpressure of at least 20 mbar in
the grain singling unit.
2. To prevent lateral loads when driving in curves
on the headlands,
raise the soil tillage tools.
3. When the direction of the implement matches
that of the direction of travel,
lower the soil tillage tools.
7.3 Checking the placement depth
1. Remove the fine soil
1
over the seed
2
.
2. Determine the placement depth
3
.
3. Cover the seed with fine soil again.
4. Check the placement depth in several places.
1
3
2
CMS-I-00003257
7.4
Using the shifted tramline
REQUIREMENTS
The fan is running
WARNING
Specific coulters are hydraulically shifted
The shifting procedure cannot be stopped.
Only a bit of space remains between the
coulters.
Keep people out of the danger area of the
implement.
CMS-T-00001922-A.1
CMS-T-00004517-B.1
CMS-T-00005493-B.1
7 | Using the machine
Turning on the headlands
MG6660-EN-II | D.1 | 27.09.2021
166