3. Couple the hydraulic hose lines
to the
hydraulic sockets of the tractor according to the
marking
.
The hydraulic plugs lock perceptibly.
4. Route the hydraulic hose lines with sufficient
freedom of movement and without chafing points.
CMS-I-00001045
6.3.6
Coupling the ISOBUS line
1. Insert the plug
of the ISOBUS line.
2. Route the ISOBUS line with sufficient freedom of
movement and without chafing or pinching points.
CMS-I-00004333
6.3.7 Coupling the power supply
1. Insert the plug
for the power supply.
2. Route the power supply cable with sufficient
freedom of movement and without chafing or
pinching points.
3. Check the lighting on the implement for proper
function.
CMS-I-00001048
CMS-T-00003611-D.1
CMS-T-00001399-D.1
6 | Preparing the machine
Coupling the implement
MG6660-EN-II | D.1 | 27.09.2021
63