6.4.3 Filling the fertiliser hopper
6.4.3.1 Filling the fertiliser hopper via the loading board
NOTE
The guard screen and function screen in the
fertiliser hopper are closed. Only a closed guard
screen and function screen can prevent fertiliser
clumps and/or foreign objects from entering the
fertiliser hopper and clogging the metering unit.
REQUIREMENTS
The transport vehicle carrying the fertiliser is
standing on a level surface
1. Determine the payload of the implement and
axles loads of the tractor.
2. Couple the implement to the tractor.
3. Secure the tractor and implement.
4. When working at night, switch on the interior
lighting of the fertiliser hopper.
5. Climb onto the loading board using the steps.
or
To unfold the ladder,
see "Operating the loading board with ladder".
6. Open the rubber straps
.
7. Open the fertiliser hopper tarpaulin
.
8. Remove residues or foreign objects from the
fertiliser hopper.
9. Fill the fertiliser hopper.
10. Close the fertiliser hopper tarpaulin with the pull
rope
.
11. Secure the fertiliser hopper tarpaulin with rubber
straps.
12. To fold the ladder,
see "Operating the loading board with ladder".
CMS-I-00001892
CMS-T-00001910-D.1
CMS-T-00001911-D.1
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
68
To Next Page
Loading...
Need help?
General
