4.14.2 Work lights
The work lights are used to improve the illumination of
the work area.
CMS-I-00002218
4.14.3 Hopper interior lighting
The hopper interior lighting serves for better viewing
inside the hopper and makes it easier to check the fill
level. The hopper interior lighting is switched on via
the lighting for road travel.
CMS-I-00002219
4.15
Electronic monitoring
4.15.1
Radar sensor
On electric drives, the radar sensor records the
working speed. The working speed is used to
determine the worked area and the required speed
for the metering drives.
CMS-I-00002221
CMS-T-00001779-B.1
CMS-T-00001987-B.1
CMS-T-00001777-C.1
CMS-T-00001778-B.1
4 | Product description
Electronic monitoring
MG6660-EN-II | D.1 | 27.09.2021
44
To Next Page
Loading...
