9.1.32 Checking the gear oil level
INTERVAL
After initial operation
Every 100 operating hours
or
Every 12 months
NOTE
There is no need to change the oil.
1. Position the implement on a horizontal surface.
2. The oil level must be visible in the inspection
window
.
Check the oil level.
or
Refill the gear oil.
CMS-I-00002782
9.1.33 Refilling the gear oil
INTERVAL
After initial operation
Every 100 operating hours
or
Every 12 months
NOTE
There is no need to change the oil.
1. Position the implement on a horizontal surface.
2. The oil neck
serves to the gear oil,
open the oil filler neck.
3. Refill the gear oil.
The oil level must be visible in the oil sight glass
.
4. Close the oil filler neck.
CMS-I-00002782
CMS-T-00003833-A.1
CMS-T-00003835-A.1
9 | Repairing the machine
Maintaining the machine
MG6660-EN-II | D.1 | 27.09.2021
215