Amazone Precea 3000 User Manual

6.4 Preparing the implement for operation
6.4.1 Adjusting the working position sensor
The working position sensor monitors the implement
position in the three-point hydraulic system and
switches the metering drives. The length of the
actuation lever is adjustable. For safe actuation, the
control lever must rest on a level contact surface.
1. Loosen the nut
1
.
2. To rest the control lever
2
on a level contact
surface,
set the position of the control lever in the desired
position on the top link
3
.
3. Tighten the nut.
4. To  the working position sensor,
refer to the ISOBUS software operating manual,
"Configuring the working position sensor"
or
see "control computer" operating manual.
12
3
CMS-I-00002608
6.4.2 Filling the seed hopper
REQUIREMENTS
The implement is coupled to the tractor
The tractor and implement are secured
The seed and seed hopper are free of foreign
objects
The seed is dry and does not stick
IMPORTANT
Leaks in the hopper cause faulty
placement
Do no walk on the hopper cover.
Keep the cover seal and sealing surface
clean.
CMS-T-00003813-E.1
CMS-T-00003625-C.1
CMS-T-00001914-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
66

Amazone Precea 3000 Specifications

General

Brand	Amazone
Model	Precea 3000
Category	Farm Equipment
Language	English