5. To lift the track marker,
apply pressure to the "yellow" tractor control unit.
or
apply pressure to the "green" tractor control unit.
6. When the track marker is completely lifted,
Press the track marker
against the rubber
block.
The transport lock
engages.
CMS-I-00000956
6.5.1.3 Precea 6000
1. To fold in the track marker,
actuate the "yellow 2" tractor control unit.
2. Put the "yellow" tractor control unit in the neutral
position.
6.5.2 Lifting the implement
REQUIREMENTS
The lighting system is clean and in perfect
technical condition
Track markers are folded in
1. Lift the implement with the 3-point power lift of the
tractor.
2. Check the connections of the hydraulic lines and
the power supply.
3. Switch off control terminal.
4. Switch off the work lights.
5. Lock the tractor control units.
6.5.3 Locking the tractor control units
Depending on the equipment, the tractor control
units are locked mechanically or electrically.
CMS-T-00005591-A.1
CMS-T-00002071-A.1
CMS-T-00006337-A.1
6 | Preparing the machine
Preparing the machine for road travel
MG6660-EN-II | D.1 | 27.09.2021
163