4. remove the singling disc
from the drive hub.
5. Keep the singling disc in the seed hopper.
CMS-I-00001912
6. Close the cover
.
NOTE
Pay attention to the guide pin
.
7. Close the locks.
CMS-I-00001913
8.7
Parking the wheel mark eradicator
REQUIREMENTS
The implement is raised
The fan is switched off
The tractor and implement are secured
IMPORTANT
Damage to the wheel mark eradicator
Before parking the implement on solid
ground,
move the wheel mark eradicators into
parking position.
CMS-T-00001919-B.1
8 | Parking the machine
Parking the wheel mark eradicator
MG6660-EN-II | D.1 | 27.09.2021
176