Amazone Precea 3000 - Checking the Coulter Connection Tightening Torque; Checking the Running Gear Connection Tightening Torque

9.1.13 Checking the coulter connection tightening torque
INTERVAL
After initial operation
Every 12 months
On telescopic coulters
Tighten the bolts to 160 Nm -180°
or
On non-telescopic coulters
Tighten the bolts to 200 Nm.
NOTE
The tightening torques must be checked when the
coulters are unloaded.
CMS-I-00002039
9.1.14 Checking the running gear connection tightening torque
INTERVAL
After initial operation
Every 12 months
Check the tightening torque on both sides.
160 Nm
CMS-I-00002038
CMS-T-00002385-C.1
CMS-T-00002386-B.1
9 | Repairing the machine
Maintaining the machine
MG6660-EN-II | D.1 | 27.09.2021
193