Repairing the machine
9
9.1 Maintaining the machine
9.1.1 Maintenance schedule
After initial operation
Checking the wheel bolt tightening torque see page 191
Checking the tightening torque for the radar sensor
bolts
see page 192
Checking the frame connection tightening torque see page 192
Checking the coulter connection tightening torque see page 193
Checking the running gear connection tightening
torque
see page 193
Checking the tyre inflation pressure see page 194
Checking the hydraulic hose lines see page 197
Checking the gear oil level see page 215
Refilling the gear oil see page 215
at the end of the season
Cleaning the distributor head see page 213
daily
Checking the top link pin and lower link pin see page 196
Every 12 months
Checking the tightening torque for the radar sensor
bolts
see page 192
Checking the frame connection tightening torque see page 192
Checking the coulter connection tightening torque see page 193
Checking the running gear connection tightening
torque
see page 193
CMS-T-00003821-C.1
CMS-T-00003822-C.1
9 | Repairing the machine
MG6660-EN-II | D.1 | 27.09.2021
183