Amazone Precea 3000 - Creating Tramlines

1. Raise the implement.
2. Secure the tractor and implement.
3. Remove the nut
1
.
4. Remove the bolt lock
2
.
5. Remove the bolt.
6. Remove the catch roller
3
.
7. To select the catch roller,
see "Determining the setting parameters".
8. Install the desired catch roller.
9. To install the suitable furrow former for the
catch roller,
see "Changing the furrow former".
CMS-I-00002876
6.4.14 Creating tramlines
6.4.14.1 Configuring the tramline control
NOTE
The automatic tramline control requires an
electrically driven grain singling unit.
See "Configuring the tramline control" in the
ISOBUS software operating manual.
CMS-T-00001881-A.1
CMS-T-00001883-A.1
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
128