6.4.13.12 Adjusting the catch roller scraper
IMPORTANT
Damage to the wheel due to abrasion by
the scraper
To check the distance,
rotate the wheel
NOTE
The adjustment of the scraper must be adapted to
the respective operating conditions. The optimum
adjustment can only be determined during field
operation.
The scrapers enable smooth running of the catch
roller on soils with sticky surface structures.
1. Raise the implement.
2. Secure the tractor and implement.
3. Loosen the nuts
.
4. Adjust the scraper
to a distance of 1 mm.
5. To check the distance,
Rotate the catch roller
.
6. Tighten the nuts.
7. Check the adjustment of the catch roller scraper
on the field after driving a short distance.
CMS-I-00002727
6.4.13.13 Changing the catch roller
NOTE
The catch roller must be adapted to the respective
operating conditions. The optimum adjustment
can only be determined during field operation.
CMS-T-00003720-C.1
CMS-T-00003902-D.1
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
127
To Next Page
Loading...
