1. Unlock the fasteners
.
2. Press the seed hopper cover
down.
3. Unlock the
fastener.
CMS-I-00001886
4. Completely open the seed hopper cover
.
The cover fastener
latches.
5. Fill the seed hopper.
CMS-I-00001887
6. Clean the cover seal and sealing surface
.
7. Close the seed hopper cover
.
The fastener
is locked.
8. Lock the fasteners.
CMS-I-00001889
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
67