Preparing the machine for road travel
If the machine is not properly prepared for road
travel, it can result in serious traffic accidents.
Check the lighting and identification for road
travel for proper function.
Remove coarse dirt from the implement.
Follow the instructions in the section
"Preparing the implement for road travel".
Parking the implement
The parked machine can tip over. People can be
crushed and killed.
Only park the machine on stable and even
ground.
Before you perform setting or maintenance
work,
make sure that the implement is in a stable
position. In case of doubt, support the
implement.
Follow the instructions in the section "Parking
the implement".
Unsupervised parking
Parked tractors with coupled implements that are
insufficiently secured and unsupervised represent
danger for people and playing children.
Before you leave the machine,
shutdown the tractor and the implement.
Secure the tractor and machine.
2 | Safety and responsibility
Basic safety instructions
MG6660-EN-II | D.1 | 27.09.2021
14
To Next Page
Loading...
Need help?
General
