4. Release the lock until the points
and
are
aligned.
CMS-I-00001910
5. remove the singling disc
from the drive hub.
CMS-I-00001912
NOTE
The filling blocks are only required for folding
implement frames.
6. The orange block is required for use in
rapeseed, beets, or sorghum.
Remove the bolt
.
7. Install the orange filling block
in the mount
.
8. Install the bolt.
9. For use in rapeseed, beets, or sorghum, remove
the cap
.
CMS-I-00003937
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
93