10. The green block is required for use in
soybean, bean, maize or
Remove the bolt
.
11. Install the green filling block
in the mount
.
12. Install the bolt.
CMS-I-00003936
13. To select the singling disc,
see "Determining the setting parameters".
14. The studs point towards the seeding housing
and stir the seed to ensure optimal of the
disc.
Install the desired singling disc.
15. Turn the lock beyond the notch
.
The points
and
are no longer aligned.
CMS-I-00001911
NOTE
The sealing wax dot
indicates a factory
setting.
16. Check the sealing wax dot.
17. If the sealing wax dot has been broken,
contact your specialist workshop.
CMS-I-00005636
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
94