2. Secure the tractor and implement.
3. Unlock the setting lever
.
4. Move the setting lever to the desired position.
5. Lock the setting lever in the grid.
6. Check the adjustment of the press rollers on the
field after driving a short distance.
7. If the seed furrow is not closed at the set press
roller pressure,
you must also adjust the press roller pitch.
CMS-I-00001927
Operating conditions Press roller pitch
Heavy soils
Increase the press roller
pitch:
Light soils
Reduce the press roller
pitch:
8. Unlock the setting lever
.
9. Move the setting lever to the desired position.
10. Lock the setting lever in the grid.
11. Check the adjustment of the press rollers on the
field after driving a short distance.
12. If the seed furrow is not closed at the set press
roller pitch,
you must also adjust the press roller distance.
CMS-I-00001929
Operating conditions Press roller distance
Heavy soils
Reduce the press roller
distance:
Light soils
Increase the press roller
distance:
13. Take the ratchet spanner from the thread pack.
14. Loosen the inner lock nut and remove it.
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
123
To Next Page
Loading...
