3. Put the collapsible bucket
under the activated
micropellet outlet
.
CMS-I-00002621
4. Relieve the bottom flap lever
.
5. Slowly open the sliding shutter
.
The micropellets are collected in the collapsible
bucket.
CMS-I-00002576
6. When the residual quantity has be fully
collected,
move the bottom flap lever
back into working
position.
7. Open the sliding shutter
completely.
CMS-I-00002622
8 | Parking the machine
Emptying the micropellet hopper
MG6660-EN-II | D.1 | 27.09.2021
174