Amazone Precea 3000 User Manual

12. Release the lock
1
and swivel it downwards.
13. To move the calibration buckets into calibration
position on an implement with hydraulic fan
drive,
pull out the interlocked calibration buckets
2
by
10 cm to the side.
or
To move the calibration buckets into calibration
position on an implement with mechanical fan
drive,
pull out the calibration buckets
2
individually by
10 cm to the side.
14. Turn the calibration bucket upwards and align the
opening with the guide marks
3
.
15. Insert the calibration bucket.
CMS-I-00001931
16. To move the calibration  lever to the
calibration position,
press and hold the lock button
1
and push it
down
2
.
17. To move the bottom  lever to the emptying
position,
press and hold the lock button
3
and push it
down
4
.
18. Clean the metering units thoroughly with a water
jet.
19. Clean the calibration buckets.
3
1
4
2
CMS-I-00001994
20. Push in the the calibration bucket
2
with the
opening facing down.
21. Swivel up the lock
1
and close it.
22. To move the calibration  lever into working
position,
press and hold the lock button and push it
upwards.
23. To move the bottom  lever into working
position,
press and hold the lock button and push it
upwards.
CMS-I-00001932
9 | Repairing the machine
Maintaining the machine
MG6660-EN-II | D.1 | 27.09.2021
202

Amazone Precea 3000 Specifications

General

Brand	Amazone
Model	Precea 3000
Category	Farm Equipment
Language	English